Drives a 16-characters x 2-lines LCD display. Uses an Arduino Nano. LCD ist Hitachi HD44780 kompatibel, benötigt also relativ viele Leitungen (4 Daten-, 2 Select-Leitungen, Kontrast-Poti, Beleuchtung) ...

Two of them are for power (VCC, GND), one for adjusting the contrast (VEE), three are control lines (RS, EN, R/W), eight pins are data lines(D0-D7) and the last two pins are for the backlight (A, K).

The character set of the controller includes ASCII characters, Japanese Kana characters, and some symbols in two 28 character lines. Using an extension driver, the device can display up to 80 ...

Your LCD display should have 16 pins coming out from the bottom. Each pin has different functions: VSS: Pin that connects to ground. VDD: Pin that connects to a 5v power supply. VO: Adjusts the ...

To link a standard 16×2 LCD directly with the microcontroller, for instance Arduino, you would need atleast 6 I/O pins to talk to the LCD. However, if you use an LCD module with I2C interface, you ...

LCD.h is the file including all the fixed constants and the local methods used to manage the display. Also useful to create a good documentation of the display features local methods. You should ...

An LCD screen is an electronic display module that uses liquid crystal to produce a visible image. The 16×2 LCD display is a very basic module commonly used in DIYs and circuits. The 16×2 translates a ...