The INT1 output pin of the accelerometer is in push-pull and active high configuration by default. Users can change the configuration to open-drain or active-low for their applications. The voltage ...

I have used an Arduino Nano with an Accelerometer. But there is few things to be taken care of as mentioned below: 1. Your Accelerometer cannot handle 5V, so always connect the Vcc of accelerometer to ...

Circuit Diagram for Arduino Accelerometer Step Counter is given below. In this circuit, we are interfacing with Arduino Nano with ADXL335 Accelerometer. X, Y, and Z pins of the accelerometer are ...

The protocol arduino firmata and a node-red flow on a server to graph it. An arduino sketch deployes on your device directly. Arduino Mega 2560: The MEGA 2560 is designed for more complex projects.

[Boris Landoni] put together a guide to using an inexpensive 3-axis accelerometer with Arduino. The chip that he chose for the exercise is an MMA7455L made by Freescale. It’s got a lot of nic… ...

Gesture-Based Control - Move mouse cursor by tilting the device in air; Wireless Communication - Bluetooth HC-05 module for cable-free operation; 3-Axis Accelerometer - ADXL335 for precise motion ...

The circuit (Fig. 2) uses Arduino Uno board wired to ADXL335 accelerometer module (connected across CON2) with its ADC inputs, namely, X-axis to A0, Y-axis to A1 and Z-axis to A2. Two pushbuttons ...

The microcontroller on the board is programmed in Arduino programming language using Arduino development environment. Fig. 3: Circuit of tilt detector. Pins A0 through A5 of Board1 are connected to ...

The Arduino 101 has the same dimensions as the Arduino Uno, and the pins are compatible. You can stick shields designed for the Uno on the 101. While the optimum voltage for the 101 is 3.3v, the ...

We don’t have much personal experience with DOF hardware, but this Arduino library which reads and compensates for three-axis magnetometer and accelerometer data looks very impressive. It sho… ...