a computer running GNU/Linux - an arduino (tested with UNO), and USB to USB-B cable to connect it. - a grove Time-of-flight distance sensor (vl53l0x), with a grove-to-wire connector - a linear ...

There is a wide application of linear actuator ... int relay1 = 6; //Arduino pin that triggers relay #1 const int relay2 = 7; //Arduino pin that triggers relay #2 It is crucial to test if the setup is ...

His latest Arduino compatible (multi program) linear actuator, DC motor ... Infrared – The on-board IR sensor works in conjunction with most Infrared remote controls, and a program comes ...

An Arduino Pro Mini uses an L9110 to control a micro linear actuator at 12v. I set a 5 sec off delay to save the actuator between temp changes. Temp in code is 31 degrees celcius open/ 28.5 degrees ...

Watch this video on YouTube. “Building a Lower-power Linear Actuator with Arduino: quite a few people have asked me about scaling down openDog to make it lighter and cheaper, so I thought I’d ...

Hackaday editors Elliot Williams and Mike Szczys kick off the first episode of the new year with the best hacks the internet has to offer. There’s a deep dive into water-level sensing using a ...

A lot of projects require linear ... the loads these actuators will encounter. [Ali] has included parts lists and build instructions in with the STL files, as well as sample Arduino code to ...

The gantry (or y-axis) is actuated by dual direct drive linear motors and is coupled to the worktable position, which determines its inertial characteristics. A 94Hz yaw mode is handled in the gantry ...