You'll need to connect the OLED display to the Arduino Nano using a 4-pin I2C interface. Simply connect a handful of pins from the OLED display to their corresponding pins on the Nano. For the push ...

After going through the tutorial, adding the library, and setting up all connections, I load the Arduino example file and get something like this. To add CS (chip select) you have to solder a wire to ...

Discover the ultimate IoT powerhouse—Arduino Nano ESP32! Unleash creativity with C/C++ in Arduino IDE, or embrace MicroPython's simplicity. Wi-Fi, Bluetooth 5 LE, 16 MB Flash, LEDs, all in a compact ...

You can check them out if you are interested. In this article, we'll build a simple, low-cost Arduino-based oscilloscope with a 1.3" OLED display that can be used to visualize waveforms accurately.

It’s inexpensive, accurate and reliable and has a wide temperature range. This article shows how to use an Arduino Uno/Nano microcontroller with an OLED display module for reading a Type K ...

This is an OpenSource project based on Arduino platform, for building a smart watch with some interesting functions: OLED Display, clock RTC, Satellite pass prediction routine, Moon phase routine, ...

which included a couple of quite small OLED displays. For the build photos it looks like there’s an Arduino Nano running the show; [Nick] relates that the chosen hardware proved challenging ...

Used Arduino Nano / Mini / Micro or other with h/w Serial and OLED i2c display 128x32 (SSD1306) or another. You may use any your display with your library, sketch very simple. Arduino RX pin connected ...