This project helps to teach people how to communicate and control an Arduino over bluetooth. This project will allow the user to toggle the state of 5 LEDs by typing commands into their phone. The ...

In the setup function, we are setting the baud rate for the Arduino serial monitor and the Bluetooth again. Do you see the difference here compared to the previous code? We are using a baud rate of ...

This is the simple method to setup Bluetooth communication between Arduino and MATLAB. Here, the MATLAB uses the laptop’s bluetooth to connect HC-05 connected with Arduino. First we have to code the ...

I connected the Bluetooth module’s rx to 11, tx to 10 and gn to gnd and vcc to 5v. The en pin was also HIGH (applying 3.3V) Then I powered up the arduino and also the Bluetooth module. Then I uploaded ...

It’s hard to imagine an easier way to set up communications between an Android device and an Arduino using Bluetooth than by following this guide. In the center of the breadboard you can see the ...

Figure 2: Central and peripheral device communication. The Arduino 101* Bluetooth® LE is based on the Generic Attribute Profile (GATT) architecture. GATT defines a hierarchical data structure ...

Once again in this project i used the Raspberry PI 0 W. The other part of the project is an Arduino Uno connected to the Sparkfun Bluetooth "Mate Silver" module. First thing to do is to configure your ...

See Efficient communication between Arduino* and Linux native processes ... and BT SPP python service process. 3 mv /home/root/bluetooth-service.tar.gz ./ 4 tar -xvf bluetooth-service.tar.gz ...