Key points: ESP32 controls an LED via GPIO pins based on commands received over Wi-Fi. Python script on the PC sends commands via sockets to the ESP32. Both devices must be on the same Wi-Fi network.

When the /off route is accessed, it sets the GPIO pin to LOW, turning the LED off. Feedback: The ESP32 sends a confirmation response back to the Python script or client (e.g., "LED is ON" or "LED is ...

The negative pin of LED is connected to the GND of ESP32 through a 330 Ω resistor. You can use any resistor value between 230 Ω and 500 Ω. Connect the LED positive pin to GPIO 16 and signal pin of Pot ...

Tuya is an All-in-one IoT Platform that enables the user to build smart IoT solutions by connecting devices efficiently, securely, and reliably. This is a getting started article to set up the Tuya ...

I’ve been playing with several ESP32 boards over the months, and tried several firmware images. I started with a tutorial for Arduino Core on ESP32, a few month later I tested ESP32 JavaScript ...

LiteWing is a compact, WiFi-controlled drone based on the ESP32 ... using Python and add more features like height hold, position hold, gesture control, etc. The latest version includes more GPIO pins ...

In response to these challenges, this project introduces an end-to-end solution to object detection utilizing an OpenCV Python-based approach. The innovation extends beyond mere visual recognition by ...