This program consists of operating a gate that opens from left to right using a stepping motor, a push button, (limit switch) and a LED ... the Lycée Professionnel privé Saint-Joseph for the Arduino ...

You will need the Arduino Board, a 560Ω resistor, and LED and the code example below. We set the pinButton variable as integer 8 and we connect the button at pin 8 on the Board. Then the LED is ...

For switches connected to the Arduino power supply, the settings are: polarity = HIGH and pinmode = INPUT, which disables the internal pull-up resistor. Note that we need external pull-down resistors ...

Then we will also build a small hardware using a bread board with a simple circuit consisting of a switch and ... The hardware connection of my Arduino is shown below, to verify the output all we have ...

The wiring diagram below shows how the turnout switches are wired to provide power ... is in the center and the LEDs are to its right and left. The push button is connected as an input to an Arduino ...