DHT11 is a Temperature and humidity sensor which as the name implies is used to ... As you can see, we have used an I2C interface module to connect the LCD module to STM32. This makes the connections ...

I have used Arduino UNO for this project. You can use other cards. NOTE: If you use another board, you may need to relocate the "SDA, SCL" pins. You can find out by looking at the data sheet of the ...

Initialize the specified I2C interface (I2C1) at the specified I2C speed. Then initialize the AHT10 unit to its default calibrated values. void AHT10_readSensorData( uint8_t *data ) Called with a ...

Arduino Nicla Sense Env is a new sensor module with ... the HS4001 humidity and temperature sensor, the ZMOD4410 gas sensor for TVOC and indoor air quality, and the ZMOD4510 gas sensor for NO2, O3, ...

Sensirion SCC30-DB Humidity and Temperature Sensor Module, available now from Mouser ... 2.4V to 5.5V and produces fully calibrated and processed measurement values in an I2C interface. The device is ...

In this research, the weather is monitoring and data logging using TTGO Call ESP 32 with Wi-Fi module, DHT 11 temperature and humidity sensor, 16*2 LCD display with I2C interface. Real Time Clock RTC ...

If you want to add humidity and temperature ... The LCD is a very cheap panel with no drivers onboard. All the drive electronics are on the PCB. The sensor is a CHT8305C which uses I2C.

Here, a fingertip heartbeat sensor to calculate the pulse rate along with DHT11 sensor to calculate the temperature and humidity ... a Wi-Fi module is already in it and an I2C module is used to ...