Measure the working voltage and current output for any project with this really fancy power meter. This power meter has a small LCD display that shows off voltage, watts, amps, and mAH and ...

PWMs target smart meters, LCD displays Posted on March 25, 2011 by Electronic Products The NCP1234 and NCP1236 family of fixed-frequency pulse-width modulation (PWM) current-mode controllers target ac ...

However, as LCD-TV screens grow bigger and brighter, they require more voltage and current to operate, increasing the need for more robust and reliable circuit protection techniques. A variety of ...

The ESP32 microcontroller measures voltage and current using a voltage divider circuit. A momentary push button allows switching between voltage and current measurements. The measured values, within ...

To read the voltage the ADC is set as Single Ended Conversion mode and the input voltage divider is set at Vcc level from vccOut pin, which remains grounded during the current measurement. The current ...

Embarking as the latest member of the ProVu family of digital panel meters, the PD6400 1/8 DIN size unit provides reliable measurement of high voltage, current, and apparent power. Independent, ...

The nominal +1.25 V reference source voltage (between pins 7 and 8) is applied across R3 (R7) to program the LED current. The programming current flows through R4 (R8) to achieve the desired reference ...

The meter and bridge will work very well at a KW and above on all bands although it is rated at 100W HF. Since the display unit firmware is limited to 100W maximum, a measurement of 1KW can be set on ...

The device measures voltage and current and displays them, along with the calculated power, on the small 0.5″ OLED display. The circuit is built around an ATmega328.

Diodes Incorporated released the AL3353 LED/LCD 40V max input boost controller with a dimming ratio of 100:1 features a wide range of applications where a constant voltage or constant current are ...