Next we connected the water flow sensor’s output to the Arduino board (filled with the sketch) and allowed water flow through the water flow sensor at a steady rate of about 1 Litre/minute. Besides ...

Arduino Water Level Indicator + Controller. March 15, 2014 by P. Marian Comments 105. Advertisement. ... This can be useful when you want to empty the tank once it is full or to stop the water flow to ...

Arduino Water Flow Sensor Working. In our project, we connected the water flow sensor to a pipe. If the output valve of the pipe is closed, the output of the water flow sensor is zero (No pulses).

HydroZone is a versatile Arduino library that enables irrigation capabilities by providing support for a Relay, a FlowMeter and timing in order to control a spatial hydro zone. The relay controls a ...

Working Concept. The Concept behind the Automatic Water Dispenser is very simple. We will use a HCSR04 Ultrasonic Sensor to check if any object such that the glass is placed before the dispenser. A ...

There are many ways to measure the flow of water. First thought would be to use a standard water flow meter that gets connected between the pump and the reservoir, however due to the spurting nature ...

Now, go to Tools and select Board as Arduino Pro Mini and upload the code (water_meter.ino) to Arduino Pro Mini as shown in Fig. 11. Fig. 11: Selecting the Board in Arduino IDE. Next, we need to ...

Abstract: This research study presents a multi-process water control loop that utilizes Arduino UNO microcontroller to control and monitor water levels in a tank. The proposed system incorporates two ...

Water Temperature Controller – Block Diagram The block diagram of this simple project is shown in Fig. 1 and its circuit diagram is in Fig. 2. The project is built around water temperature sensor ...

Considering microfluidic technology, this work has been innovated to consist of monitoring, temperature control and cooling sections. The work consists of peltier a module attached to the heatsink and ...