READ the wiki! Hello world! Today i made a c# Application with visual studio to control RGB Leds/Led strips. The Arduino code is very simple. The source is open to modify and included in this ...

This trick uses an Arduino and a few servos to control three sets of blinds. The build is similar to those we’ve seen in the past, but you can view the full details of how he built the hardware ...

But, in reality, we are far away from See-through touch screens, and the closer we can get is to control window blinds or constraints ... will be written on the Arduino IDE, the same is discussed ...

If you don’t want to be bothered to get out of your chair, you can automate the blinds with an Arduino ... incorporates an IR sensor so you can control the blinds with any universal remote ...

The BlinkLED example code ... Arduino pin "+5V" to "+" rail of breadboard c) Wire any Arduino pin labeled "GND" to "-" rail of breadboard Here is a brief description of the sketch versions: ...

I made this Arduino project that allows to turn ON and OFF LEDs using a cheap IR remote control as a preparation ... have to change the code inside the switch() function and add more cases. For ...

And, that signal is further used to control the brightness of the Power LED. As per the circuit diagram, we have made a voltage divider circuit using LDR and 100k resistor. The voltage divider output ...

There are two ways to go about lighting an RGB LED module on any Arduino board. The usual method is to use the Arduino’s analog pins to send PWM signals to the module. This lets you mix each color, ...

Pulse Width Modulation is definitely the preferred method of dimming an LED with a microcontroller, but we were interested in hearing about a different method called Binary Code Modulation.

Arduino is a well-known open-source electronics platform that provides users with the ability to create interactive and easy-to-control systems in a reliable ... Use the IDE to write code that ...