If you want to make your Arduino project more compact ... The serial monitor read out will look something like this when you press the push buttons and move the joystick handle: Keep in mind, I had ...

After downloading and installing the XCTU software, open it and make sure your XBee module is properly connected. Check the COM port of the Arduino board in device manager. Step 1:- Now, click on the ...

Description : Arduino based FM radio using TEA5767 FM module, LM386 Audio amplifier module with KA2284 ... Radio stations are selected via two push buttons and Audio Volume via a Potentiometer on the ...

[Lars] shows you how to get a perfect score on the first four levels of BIT.TRIP RUNNER by using an Arduino to time and send button presses. This is a pretty simple game that uses a couple of ...

As it is clear, the circuit consists of 3 main parts: Arduino-Nano (Controller), FM receiver module, and the audio amplifier ... and also reads the status of the SW1, SW2, and SW3 push buttons. It ...

An Arduino Nano reads three push buttons for frequency tuning and displays the FM station ... The circuit consists of three main parts: the FM receiver module, the audio amplifier, and the digital ...

Once the laser beams are cut, the alarm will go off and will not stop until the push button is pressed even though the module detects the laser again. Link to Arduino code. #define Rec 0 #define Laser ...

In here I used a breadboard for connecting the modules, and a push-button is used as a doorbell switch. Similarly, on the receiver side, we need to use another Arduino board with the RF receiver ...