Here is a simple Arduino Camping Light project. In this design, only one push button switch is used to control the light output (from a bunch of white LEDs) between off, dim, medium, and full ...

This project demonstrates how to control an LED using a push button with an Arduino board ... This simple circuit can be a great starting point for learning about digital inputs and outputs. Press the ...

The decimal number increases from 0 to 255 each time the momentary push-button is pressed ... Now lets see the schematic and how I’ve connected the 8 leds + resistors and 1 button + pull-up resistor ...

the Arduino will initiate a reading from the temperature sensor and then display the data on an LCD screen or Serial Monitor. A simple push-button circuit will be used, typically with a pull-down or ...

The above circuit can be divided into two parts. The first one is USB, and the second one is Push Buttons. Data pins of USB are connected to PB3 and PB4 of ATtiny85 through 47-ohm resistors. R1 is a ...

As a controller, I have used the cheap and popular Arduino-Nano board. So let’s get started! Figure 1 shows the schematic diagram of the device. As it is clear, the circuit consists ... R1 and R2 are ...