In figure 3, the same logic operation as with figure 2 is illustrated with replacing the IC2 with a NOR or NAND gate. This would yield to the same result as with figure 2 having an inverted output. In ...

This project implements a NAND gate using an Arduino Uno and LEDs. The circuit consists of two input push buttons, three LEDs for input and output display, and pull-up resistors connected to the push ...

So if any one or both inputs are low the output of NAND gate will be high. In this NAND gate circuit diagram we are going to pull down both input of a gate to ground through a 1KΩ resistor. And then ...