While the sensor ... primarily an Arduino project, you'll also find a version of the code adapted for ESP32. Keep in mind, small but crucial differences exist between these two microcontrollers. Note: ...

Upload the sketch to Arduino Nano and connect all the components as shown in the circuit diagram. Attach the lidar module to the stepper motor shaft with the lidar sensor facing towards the object.

This ultra-cute tiny LiDAR rangefinder ... 64×32 OLED display module that was simply too slick to pass up. USB connector for charging on the bottom, hole for distance sensor out the top.

Project Overview Goal: Develop an autonomous RC system capable of real-time obstacle detection and navigation using a combination of thermal imaging and LIDAR ... Arduino-based (e.g., ESP32-S3 Mini or ...

GND - Ground Connected to Ground pin of the Arduino. SCL – Module output (HIGH (3.3 V) motion detected/LOW (0 V) idle). CDS – Sensor disable input (low = disable). This pin is directly connected to ...