We will interface the water flow sensor with Arduino and LCD, and program it to display the volume of water, which has passed through the valve. For this particular project, we are going to use the YF ...

Next we connected the water flow sensor’s output to the Arduino board (filled with the sketch) and allowed water flow through the water flow sensor at a steady rate of about 1 Litre/minute. Besides ...

The pulses are counted and accordingly the number of litres are calculated by the Arduino program. Thus, the number of litres is displayed on the LCD in up to three decimal places (that is, up to one ...

YFS201 Hall Effect Water Flow Sensor This sensor sits in line with the water line and contains a pinwheel sensor to measure how much water has moved through it. There is an integrated magnetic ...

Arduino WaterSensor Installation: Place watersensor.py and Arduino.py in the same folder Verify and Upload WaterSensor.ino on the Arduino Edit watersensor.py using a text editor, input a name for the ...

Emergence of Controlled Environment Agriculture (CEA) ranging from computer controlled water irrigation system to lightning and ventilation has changed the conventional scenario of farming. This paper ...

Emergence of Controlled Environment Agriculture (CEA) ranging from computer controlled water irrigation system to lightning and ventilation has changed the conventional scenario of farming. This paper ...

Working Concept. The Concept behind the Automatic Water Dispenser is very simple. We will use a HCSR04 Ultrasonic Sensor to check if any object such that the glass is placed before the dispenser. A ...

Here is a tested Arduino project that uses 3 sensor probes as water level indicator with 3 leds and one LCD display + a simple controller that turns on a motor when the water has reached the desired ...