DHT11 is a Temperature and humidity sensor which as the name implies is used to ... As you can see, we have used an I2C interface module to connect the LCD module to STM32. This makes the connections ...

I have used Arduino UNO for this project. You can use other cards. NOTE: If you use another board, you may need to relocate the "SDA, SCL" pins. You can find out by looking at the data sheet of the ...

Of course, DHT11 has the lowest precision and DHT31 has the highest accuracy DHT11 이나 DHT22 는 디지털 입력 PIN 을 사용하므로, LCD 를 사용하는데 불편함이 없었으나, DHT31 은 i2c ... SHT31 temperature and humidity sensor ...

Sensirion SCC30-DB Humidity and Temperature Sensor Module, available now from Mouser ... 2.4V to 5.5V and produces fully calibrated and processed measurement values in an I2C interface. The device is ...

Use an ATtiny85 to display sensor values on an I2C LCD (equiped with PCF8574): GY21P (Si7021+SHT21) I2C sensor, temperature and relative humidity DS18b20 Dallas sensor, one wire, temperature I had ...

Arduino Nicla Sense Env is a new sensor module with ... the HS4001 humidity and temperature sensor, the ZMOD4410 gas sensor for TVOC and indoor air quality, and the ZMOD4510 gas sensor for NO2, O3, ...

If you want to add humidity and temperature ... The LCD is a very cheap panel with no drivers onboard. All the drive electronics are on the PCB. The sensor is a CHT8305C which uses I2C.

DHT11 Module features a temperature & humidity sensor complex with a calibrated digital signal ... temperature and also show the temperature and fan speed changes on a 16x2 LCD display. dht.humidity() ...